Powersoft K2 DSP 2-Channel High Performance Power Amplifier

With up to 4,800 W the K2 is the "smallest" amplifier in K Series. Built on the same technologies and features as present in the bigger models, it makes a full-fledged member of the amplifier line that changed the face and direction of the professional audio amplification market.
Only 8kg/17.6lbs light, the K2 is the ideal companion for where space, weight, and uncompromised sound quality matter.
Per Step-up card a K2 can be upgraded to become a K3 – more power without replacing the entire amplifier.
In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size. Fully digitally controlled and with a serial PC communication port as standard, the K2 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K2 DSP+AESOPamounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft's Power supply Protections General Settings Monitoring Digital Signal Processing* Remote management*
Fully protected circuit design with:
General
Number of channels
2
Output power
Single channel mode
Bridge mode
2 Ω
4 Ω
8 Ω
4 Ω
8 Ω
2400 W
1950 W
1000 W
4800W
3900W
Max output voltage / current
140 Vpeak / 102 Apeak
100 Vpeak
140 Vpeak
280 Vpeak
AC Main Power
Power supply
Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement
100-240 V ±10%, 50-60 Hz
Operating voltage
90 V - 264 V
Power consuption**
115 V
230 V
Idle
69 W
1.2 A
88 W
1.35 A
1/8 of max output power @ 4 Ω
609 W
6.3 A
609 W
3.1 A
1/4 of max output power @ 4 Ω
1219 W
11.4 A
1219 W
5.7 A
Thermal
Operating temperature range
0° - 45° C - 32° - 113° F
Thermal dissipation**
115 V
230 V
Idle
382 BTU/h
96.3 kcal/h
382 BTU/h
96.3 kcal/h
1/8 of max output power @ 4 Ω
722 BTU/h
181.9 kcal/h
722 BTU/h
181.9 kcal/h
1/4 of max output power @ 4 Ω
1062 BTU/h
267.6 kcal/h
1062 BTU/h
267.6 kcal/h
AUDIO
Gain
26 dB
29 dB
32 dB
35 dB
Input sensitivity
4.48 V
3.17 V
2.47 V
1.59 V
Max input level
27 dBu
24 dBu
21 dBu
18 dBu
Gate
-52 dBu
-55 dBu
-58 dBu
-61 dBu
Frequency response
20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio
> 106 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation
> 70 dB @ 1kHz
THD+N
< 0.2% from 1 W to full power (typically < 0.05%)
IMD
< 0.2% from 1 W to full power (typically < 0.05%)
Input impedance
10 kΩ balanced
Slew rate
50 V/μs @ 8Ω, input filter bypassed
Damping factor
> 5000 @ 20-200 Hz
DSP
DSP architecture
Analog Devices SHARC® DSP
AD Converter
Dual 24 bit 96 kHz Tandem® architecture with 127 dBA of dynamic range and THD
DA Converter
Dual 24 bit 96 kHz Tandem® architecture with 122 dBA of dynamic range and THD
Internal precision
40 bit floating point
Firmware
Network upgradable firmware
Memory/presets
8 MB (RAM) plus 2 MB flash for presets / 50 stored locally + 150 stored on Smart Card
Latency
6.0 ms fixed latency architecture
Input equalizer
Three layers (PEQ, raised cosine, shelving), 32 filters each + group filters, up to 256 filters total
Output equalizer
16 fully parametric filters per channel, IIR: peaking, hi/lo-shelving, hi/lo-pass, band-pass, band-stop, all-pass. Custom FIR up to 384 taps @ 48 or 96 kHz
Crossover
Butterworth, Linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR)
Delay
up to 4 s on input section; up to 32 ms per output, sample-by-sample stepping
Limiters
Power limiter, TruePower™, RMS voltage, RMS current + Peak limiter
Damping control
Active DampingControl™
Front panel
Indicators and Controllers
2 x LED bar - Signal level and over-temperature protection
4 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch - Connectors
AC main
1 x IEC C20 connector - 20 A max (region-specific power cord provided)
Audio signal input
2 x XLR - Signal input
1 x Analog/Digital input - Switchable Analog line/AES3 digital input on channel 2Auxiliary voltage
1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - External voltage connector (DSP version only)
Audio out (link through)
2 x XLR - Signal output (link through)
Loudspeakers
2 x speakON - Neutrik NL4MD
Network/data
2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
1 x Rj45 socket - RS485 data connection (non-DSP version)
Rear panel
Indicators and Controllers
1 x Push-button - Link channel pair
1 x Push-button - Toggle ANALOG input/AES3 input on selected connector
Construction
Dimensions (L x H x W)
483 mm x 44.45 mm x 380 mm (19.0 in x 1.8 in x 15.0 in)
Weight
7.4 kg (16.3 lb)
* Data is subject to change without notice.