Keyence Digital Sensor Amplifier Unit GT-71AP PNP DIN Rail Type

Amplifier Unit, DIN Rail Type, PNP - GT-71AP

GBP 58.00

14 days for easy/free returns

This product is not available in a stationary store

Safe shopping

Model			GT-71AP^*1
Output			PNP output
Mounting method			DIN rail mount^*2
Main unit/Expansion unit			Main unit^*3
Current consumption.	At 12 V	Normal	1140 mW (95 mA) or less
		Power saving (Eco)	600 mW (50 mA) or less
	At 24 V	Normal	1200 mW (50 mA) or less
		Power saving (Eco)	840 mW (35 mA) or less
Display power	Measured value display		6-digit 7-segment LED (red)
Display method	Other displays		2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range			-99.999 to 999.999
Display resolution			1 μm 0.039 Mil
Sampling rate			2000 times/second
Major functions			Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Control input	Timing input		Input time: 2 ms or more
	Preset input		Input time: 20 ms or more
	Bank input
HIGH, GO, LOW output			PNP open collector, 50 mA max. 30 V or less residual voltage: 1 V or less, N.O./N.C. switchable
Response time			hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
Rating	Power source voltage		12 to 24 VDC, ripple (P-P) 10% or less^*4
Environmental resistance	Operating temperature range		-10 to 55°C 14 to 131°F, No freezing
	Operating ambient humidity		35 to 85% RH (No condensation)
	Vibration		10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z directions
Material			Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories			Instruction manual
Weight			Approx 110 g (including Power cable)
^1 The amplifier models indicated with “A” at the end of the model code are the upgraded version that provides compatibility with the DL series communication unit. Other models (without “A” at the end of the model code) are not compatible with the DL series, but compatible with GT-H10/H10L/H22/H22L. ^2 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751). ^3 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^4 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Producer

Product code

GT-71AP

Series

Warranty

Package weight [g]

Condition

Seller warranty 1M

Item is refurbished by manufacturer, which means it comes from returns or similar. Refurbished products are fully tested for functionality and defects before they are sold. Item is provided with 1-month seller's warranty.

Ask a question about this product

Write your opinion